服務熱線 852-2425 8136
首頁»產品介紹»Desktop Metal Fiber
產品

Industrial-grade composites, featuring continuous fiber tapes for unrivaled part strength*. Fiber™ LT is available via an all-inclusive, hardware-as-a-service subscription billed annually at introductory pricing of $3,495 per year.

優勢
Fiber™ LT Order Now
Fiber™ HT Order Now

Fiber

Fiber™ offers users exceptional part quality and a wide range of engineering-grade materials—all on a user-friendly, desktop printer.


Fiber 特點

·Strong parts

Fiber™ combines the exceptional performance of continuous fiber with the ease of FFF printing to produce high-performance parts that are stronger than steel, lighter than aluminum, and can operate continuously in the toughest environments up to 250 ºC.



·Continuous fiber reinforcement

Continuous fiber tape is applied along critical load paths in a process called Micro Automated Fiber Placement (µAFP). Layers of highly loaded continuous fiber tape are laminated to build fully-dense, reinforced sections two times stronger than steel at <1/5 the weight (up to 2,500 MPa tensile strength and <1.5 g/cc).


·Low porosity

Utilizing tapes made with 12k continuous fiber tows, up to 60% fiber volume fraction, and exceptional resin impregnation, Fiber™ is able to achieve continuous fiber reinforcement with less than 1% porosity.


·Multi-directional reinforcement

Layers of continuous fiber are deposited via µAFP. Users can automatically optimize fiber orientation for maximum coverage, or enable Expert Mode to tailor orientation for specific loading conditions.


·Widest range of materials

Fiber™ prints with two printheads—one dedicated to continuous fiber tape; one dedicated to chopped fiber-reinforced filament. Designed for versatility, the printer supports a wide range of fiber-reinforced composites to enable a broad set of applications from consumer electronics to automotive.


·Accessible to all

With a wide range of materials, easy-to-use platform, and affordable subscription tiers, Fiber™ offers high-quality composite printing at a price point every engineer and designer can access.


·Easy to use

In a matter of minutes, users can begin printing industrial-grade composites from the comfort of their desktop. Entry-level settings and opt-in advanced controls allow every engineer to produce high-quality composite parts at the press of a button.


·Affordable

Starting at just $3,495/yr—¼ the cost of other industrial continuous fiber composite printers***—and boasting superior materials and a large build envelope, Fiber™ offers unrivaled utility at just a fraction of the cost. With Fiber™, engineers no longer have to trade between high quality, speed, and affordability.

Fiber Applications

Fiber™ applications span a variety of industries including manufacturing, tooling, automotive, consumer, electronics, and marine.





CNC fixture A | PEEK + CF High temp gear | PEKK + CF Camera mount A | PA6 + CF



Mirror mount | PA6 + FG
Bike pedal crank | PA6 + FG
Inspection plate | PA6 + FG



CNC fixture B | PEKK + CF Camera mount B | PA6 + FG
High temp nozzle | PEKK + CF


Fiber Specification

Fiber™ is the only composite 3D printer to use micro automated fiber placement (μAFP)—unlocking unpar¬alleled composite part strength for a desktop printer. Featuring closed loop heat control, the µAFP head constructs a high-density, continuous fiber reinforcement while the FFF printhead enables a high-resolution exterior shell. Utilizing tapes made with 12k continuous fiber tows, up to 60% fiber volume fraction, and exceptional resin impregnation, Fiber™ is able to achieve continuous fiber reinforcement with less than 1% porosity—delivering parts with 2x the strength of steel at 1/2 the weight of aluminum.


Fiber™ LT

Fiber™ HT

Build size
310 x 240 x 270 mm
310 x 240 x 270 mm
Layer height
50 μm
50 μm
Compatible materials
PA6 + CF
PA6 + FG
PEEK + CF
PEKK + CF
PA6 + CF
PA6 + FG
Reinforcement
Automated optimization
Automated optimization
Custom, targeted reinforcement
Standar configuration
1 FFF head
1 μAFP head
2 FFF heads
1 μAFP head


下載
應用
x

扫一扫